What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 20.06.2025 00:30

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At least they know the answer if they wanted it.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Why is Canada letting too many Indians in Canada?
For this case there are devices called Metal oxide varistors (MOV).
what exactly is a ‘surge’ protector?
A circuit breaker is similar, but is resettable.
These are simplified answers to the original question, and does not change anything I wrote above.
It also is a device that limits the change in current flow.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
All you need to know about 2025 MLB Draft Combine - MLB.com
This device then solves the entire problem.
I post the exact comment here.
The third is lightning and “how it gets conducted into a home.”
How does Bollywood influence Indian culture?
Barnstars:
This is where the MOV conducts again, and dissipated the energy.
nine
What traits are considered unattractive? Which traits are typically seen as attractive and why?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is 'the assistant's answer'
Here is a simplified AC power diagram.
[old diagram got deleted by accident]
[image of Common-mode choke]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What does it feel like to "lose your looks" to age?
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then describes Rainy Season and Lightning.
New Pluto-Like Planet Discovered In Solar System — What To Know - Forbes
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This one hit behind the barn.
King Charles III pays respects to Air India crash victims at his annual birthday parade - PBS
What is lightning?
But it can get overloaded, and no longer works.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Do women like men who have slept with many women?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What are the withdrawal symptoms of Klonopin 1mg?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
There are two important concepts here.
Upvotes:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
The Best Clone Characters To Create In The Alters - GameSpot
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Edit 2024–10.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
One
(Dc diagram shown, AC is similar).
First Sentence:
Has Pope Francis signed a document that gay men can now become priests?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Because the load is inductive, the current lags the voltage.(by a bit).
What does a fuse do?
In schematic diagrams this is the symbol for a fuse:
2024–10–10[John johnson John Johnson ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then asserts :
the problem then depends on "how fast does the fuse operate?".
but this device (an Inductor) … impedes the rapid changes in the current.
a photo is worth a thousand words.
He then describes the function of a fuse.
A fuse is a non-resetable over current circuit protector.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The other is “what does a “fuse” do?”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Now when you have a certain ac resistance, then a current flows in a loop.
An AC voltage/ current source, and an ac inductive load.
The bolt then partially travels down the line to your home.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
so, what happens?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
There are three different concepts here that are getting confused.
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
It seems Mohan does not understand the difference between a comment and an Answer.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is where this question deviates from being a 'generic' question, and becomes more specific.
But… the neutral is now “floating” because of the 1 ohm resistance.
but I think this circuit , shows a few more pieces.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–16 [ OO OLAOYE OYEBODE ]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
One is “what exactly is in a ‘surge protector’ ? ”
So, the voltage could go up to 500 volts, and the fuse will not open up.
eight
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi